Content Source: 2021 Indian Scout Bobber Owner’s Manual (9931589 R02) > Features and Controls Chapter

IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle.Always follow the warnings and instructions in Owner's Manual.

Click the CONTENTS link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com

Instrument Cluster

The instrument cluster includes the speedometer, indicator lamps and Multi-Function Display (MFD).
Image
  • Speedometer
  • Indicator Lamps
  • Multi-Function Display (MFD)

Speedometer

The speedometer displays forward vehicle speed in either miles per hour or kilometers per hour.

Indicator Lamps

Lamp Indicates Condition
Image
 High Beam The headlight switch is set to high beam. This indicator will flash if there is a problem with the low or high beam light.
Image
 Chassis Fault The alert symbol illuminates if a chassis fault occurs.
Image
 Turn Signals One arrow flashes when the corresponding turn signal is activated. Both arrows flash when the hazard signal is activated. If there is a problem in the signal system, the lamps will flash at twice the normal rate.
Image
 ABS Not Activated The indicator remains on until the anti-lock system activates, which occurs when vehicle speed exceeds 6 mph (10 km/h). When the lamp is illuminated, the anti-lock brakes will not activate, but the conventional brake system will continue to operate normally.
Image
 Neutral The transmission is in neutral and the power switch is ON.
Image
 Low Fuel This lamp illuminates when about 0.5 gal (1.9 L) of fuel remains in the tank.
Image
 Check Engine If this lamp illuminates while the engine is running, see your dealer promptly. The light will remain on if the tilt sensor shuts down the engine. If abnormal sensor or engine operation is detected the light will remain on as long as the fault condition exists. Retrieve the error codes for diagnosis. See Engine Error Codes.
Image
 Engine Overheat The engine overheat light will illuminate when the engine temperature exceeds normal operating temperature.
Image
 Vehicle Speed When standard mode is selected, speed displays in miles per hour.
Image
 When metric mode is selected, speed displays in kilometers per hour.

MFD Tell-Tales

Lamp Indicates Condition
Image
 Low Oil Pressure The Low Oil Pressure lamp illuminates when oil pressure drops below a safe operating pressure while the engine is running. If this lamp illuminates while the engine is running above idle speed, turn the engine off as soon as safely possible and check the oil level. If the oil level is correct and the lamp remains on after the engine is restarted, turn the engine off immediately. See your dealer.
Image Battery Voltage The Battery Voltage lamp illuminates if high or low battery voltage is detected, or if there is a charging system fault. Turn non-essential accessories off to conserve power. Make sure the charging system is operating properly. See Battery Charging Rate Low or Battery Discharges.
Image
 Vehicle Speed When standard mode is selected, speed displays in miles per hour.
Image
 When metric mode is selected, speed displays in kilometers per hour.

© Copyright Polaris Inc. All rights reserved.