Content Source: 2020 Indian FTR 1200 Owner’s Manual (9931115 R02) > Features and Controls Chapter
| IMPORTANT |
|
The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle.Always follow the warnings and instructions in Owner's Manual. Click the CONTENTS link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com |
| Symbol | Switch | Description |
|---|---|---|
 |
Horn Switch | Press the horn switch to sound the horn. See Horn Button. |
 |
High Headlight Beam Switch | The high headlight beam switch activates the high headlight beam. See Trigger Switches. |
 |
Low Headlight Beam Switch | The low headlight beam switch activates the low headlight beam. Press down momentarily to activate Flash to Pass. See Trigger Switches. |
 |
Turn Signal Switch | Move the switch to the left to activate the left turn signals. Move the switch to the right to activate the right turn signals. A signal will deactivate automatically when speed or distance reach predetermined levels. To cancel a signal manually, move the switch to the center position and push it inward Momentary Feature: Move the turn signal switch left or right and hold it in that position for at least one second. The momentary feature will activate and the signal will then cancel when the switch is released. See Turn Signal/Hazard Switch. |
 |
Emergency Flasher Switch (Hazard Switch) | The hazard switch activates and cancels the emergency flashers. Press and hold on the center of the switch to activate emergency flashers. See Turn Signal/Hazard Switch. To activate, move press and hold switch while in the center position until hazards activate. To cancel, press and release switch while in the center position. |
 |
Stop Switch | Press the bottom of the switch (RUN) to allow the engine to start and run. Press the top of the switch (STOP) to stop the engine. See Engine Stop/Run Switch. |
 |
Starter Switch | Use the starter switch to start the engine. The engine stop/run switch must be in the RUN position. See Engine Stop/Run Switch. |
 |
Right-Hand Trigger Switch | Use the right-hand trigger switch to cycle through the multi-function display. |
© Copyright Polaris Inc. All rights reserved.