Content Source:
2020 600 Indy Owner's Manual (9929776 R02) > The Perfect Fit Chapter
| IMPORTANT |
|
The Owner's Manual for this vehicle contains
warnings, instructions and other information you must read and fully
understand
before safely riding or performing maintenance
on this vehicle.Always follow the warnings and instructions in Owner's
Manual.
Click the CONTENTS link above for the Table Of
Contents, or download a full PDF of the Owner Manual in the Owner
Support area
of Polaris.com
|
Handlebar Adjustments
When adjusting handlebar
position or angle, be sure the handlebar, brake lever and throttle
lever operate smoothly and do
not hit the gas tank, windshield or any other part
of the machine when turned fully to the left or right. If necessary,
adjust
the left and right hand controls. See
Left Hand Control Alignment.
Handlebar Position
- Loosen the upper
handlebar clamp screws.
- Adjust the handlebar
forward or rearward to the desired position.
- Tighten the screws
to specification. Maintain an equal gap between the clamp and riser
while tightening. Do not over-torque.
| TORQUE |
| 16 ft-lbs (21.6 Nm) |
Handlebar Angle
- Loosen the lower
riser clamp screws.
- Adjust the riser
to the desired position.
- Tighten the screws
to specification. Maintain an equal gap between the clamp and riser
while tightening. Do not over-torque.
| TORQUE |
| 16 ft-lbs (21.6 Nm) |
