Content Source: 2020 600 Indy Owner's Manual (9929776 R02) > The Perfect Fit Chapter

IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle.Always follow the warnings and instructions in Owner's Manual.

Click the CONTENTS link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com

Left Hand Control Alignment

Image
  1. Loosen the four control block mounting screws.
    caution
    Take care to avoid damaging hand warmer/brake switch wires when moving components.
  2. Move the control block to the desired position.
    NOTE
    If the control is loose and was inadvertently moved without loosening the screws, move the control block slightly to the left or right to relocate the pins.
  3. Tighten the screws to specification in the sequence shown in the image. Do not over-torque.
TORQUE
24 in-lbs (2.7 Nm)

© Copyright Polaris Industries Inc. All rights reserved.