n Frequently Asked Questions
 

Content Source: RideCommand™ User’s Guide for 2018-2019 Vehicles (9929371 Rev 02) > Maintenance Chapter

Frequently Asked Questions

  1. How do I update my map on my display?

    Log in at my.polaris.com to download the latest MAPS/Software data. Then transfer the files to the Display using a USB flash drive. Refer to Update Software or MAPS/Software Data on Update Maps.

  2. Why does my display not acquire satellite signal or GPS?

    The GPS can take a few minutes to lock from a cold start. After warm-up, if less than 4 satellites are shown in the GPS satellite screen move the vehicle to an area free of overhead obstructions. Refer to Satellite Status on Settings.

  3. How do I connect my phone via Bluetooth to the Display?

    Refer to Bluetooth on Device Manager Screen. Refer to the phone’s user manual for specific Bluetooth functionality.

  4. How do I change the screens brightness?

    Option 1: While on any screen, tap the POLARIS icon at the top of the display screen. Adjust the brightness bar.

    Option 2: Settings > General Settings > Turn Auto Brightness ON/OFF.

  5. How do I find what version of software my display currently has?

    Settings > Info

  6. How do I set the clock on my display?

    Option 1: Make sure the time zone (GMT offset) and daylight savings mode is correct for your location if in GPS mode. GPS automatically sets the clock when there is a locked GPS signal.

    Option 2: Settings > Time Settings


© Copyright Polaris Industries Inc. All rights reserved.