Content Source: 2021 Slingshot Owner’s Manual (9939930 R02) > Cleaning and Storage Chapter

IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle.Always follow the warnings and instructions in Owner's Manual.

Click the CONTENTS link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com

Removal From Storage

  1. Remove the fabric cover.
  2. Remove intake and exhaust opening covers (if covered for storage).
  3. Install the tires. Lower the vehicle and remove the jack stands.
  4. Verify that tire pressure is at specification. Refer to safety labels on the vehicle or to the Specifications chapter.
  5. Install the battery and perform an electrical inspection.
  6. Inspect the spark plugs. Install new spark plugs if necessary.
  7. If the vehicle was stored in an area subject to wide swings in temperature and humidity (such as outdoors), change the engine oil before starting the engine.
    NOTICE
    During storage, temperature and humidity changes can cause condensation to form in the crankcase and mix with engine oil. Running the engine with oil that contains condensation can cause engine damage.
  8. Inspect the storage area for signs of fluid leaks. Identify and perform service to any leaking components.
  9. Wash and polish the vehicle. Wax, polish or apply protectant to appropriate components.
  10. Perform the pre-ride inspections. See the Pre-Ride Inspections chapter for details.
  11. Check any fluid levels not included in the pre-ride inspection.

© Copyright Polaris Inc. All rights reserved.