Content Source: 2021 RANGER EV Owner’s Manual (9939923 R01) > Maintenance Chapter

IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle.Always follow the warnings and instructions in Owner's Manual.

Click the CONTENTS link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com

Gearcases

Gearcase Specification Chart

Gearcase Lubricant Capacity Fill Plug Torque Drain Plug Torque
Main Gearcase (Transaxle) ATV Angle Drive Fluid 20.3 oz.
(600 ml)
14 ft lbs.
(19.4 Nm)
14 ft lbs
(19.4 Nm)
Front Gearcase Demand Drive Fluid 5.1 oz.
(150 ml)
8–10 ft lbs.
(11–13.6 Nm)
11 ft lbs.
(15 Nm)

Main Gearcase (Transaxle)

Always check and change the main gearcase oil at the intervals outlined in the Periodic Maintenance Chart. Maintain the oil level even with the bottom thread of the fill plug hole .
Refer to the Gearcase Specifications Chart for recommended lubricants, capacities and torque specifications.
Image

Oil Check

The fill plug is located at the right rear of the vehicle.
To check the oil, do the following:
  1. Position the vehicle on a level surface.
  2. Remove the fill plug .
  3. Check the oil level.
  4. Add the recommended oil as needed.
  5. Reinstall the fill plug. Torque to specification.

Oil Change

The drain plug is located on the lower right side of the main gearcase, near the fill plug . Refer to the Gearcase Specifications Chart for recommended lubricants, capacities and torque specifications.
To change the oil, do the following:
  1. Remove the fill plug.
  2. Place a drain pan under the drain plug. Remove the drain plug. Allow the oil to drain completely.
  3. Wipe the magnetic end of the drain plug clean to remove accumulated metallic filings.
  4. Reinstall the drain plug. Torque to specification.
  5. Add the recommended oil as needed. Do not overfill.
  6. Reinstall the fill plug. Torque to specification.
  7. Check for leaks. Dispose of used oil properly.

Front Gearcase

Always check and change the front gearcase oil at the intervals outlined in the Periodic Maintenance Chart. Maintain the oil level even with the bottom thread of the fill plug hole .
Refer to the Gearcase Specifications Chart for recommended lubricants, capacities and torque specifications.
Image

Oil Check

The front gearcase fill plug is located on the left side of the front gearcase.
To check the oil, do the following:
  1. Position the vehicle on a level surface.
  2. Remove the fill plug .
  3. Check the oil level.
  4. Add the recommended oil as needed.
  5. Reinstall the fill plug. Torque to specification.

Oil Change

The drain plug is located on the lower right side of the main gearcase, near the fill plug . Refer to the Gearcase Specifications Chart for recommended lubricants, capacities and torque specifications.
To change the oil, do the following:
  1. Support the vehicle securely with a jackstand.
  2. Remove the front tire on the driver's side.
  3. Place a drain pan under the drain plug. Remove the drain plug. Allow the oil to drain completely.
  4. Wipe the magnetic end of the drain plug clean to remove accumulated metallic filings.
  5. Reinstall the drain plug. Torque to specification.
  6. Add the recommended oil as needed. Do not overfill.
  7. Reinstall the fill plug. Torque to specification.
  8. Check for leaks. Dispose of used oil properly.

© Copyright Polaris Inc. All rights reserved.