This POLARIS vehicle is equipped with three-point lap and diagonal seat belts on all seats. Always make sure the seat belts
are secured for all riders before operating. The driver’s seat belt is equipped with a seat belt interlock. Vehicle speed
will be limited to 15 mph (24 km/h) if the seat belt is not secured.
WARNING |
Falling from a moving vehicle could result in serious injury or death. Always fasten your seat belt securely before operating
or riding. |
To wear the seat belt properly, follow this procedure:
- For 3-point belts with D loops , pull the seat belt latch downward and across your chest toward the buckle at the inner edge of the seat. The belt should fit snugly across your hips and diagonally across your chest. Make sure the
belt is not twisted.
- Push the latch plate into the buckle until it clicks.
- Release the strap, it will self-tighten.
- To release the seat belt, press the square red button in the buckle’s center.
Seat Belt Inspection
Inspect all seat belts for proper operation before each use of the vehicle.
- Push the latch plate into the buckle until it clicks. The latch plate must slide smoothly into the buckle. A click indicates
that it's securely latched.
- Push the red release latch in the middle of the buckle to make sure it releases freely.
- Pull each seat belt completely out and inspect the full length for any damage, including cuts, wear, fraying or stiffness.
If any damage is found, or if the seat belt does not operate properly, have the seat belt system checked and/or replaced by
an authorized POLARIS dealer.
- To clean dirt or debris from the seat belts, sponge the straps with mild soap and water. Do not use bleach, dye or household
detergents.