Content Source: 2021 Indian Scout Bobber Owner’s Manual (9931589 R02) > Maintenance Chapter

IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle.Always follow the warnings and instructions in Owner's Manual.

Click the CONTENTS link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com

Seat Removal

Scout Bobber,Scout Bobber Sixty, And Scout Bobber Twenty (North America)

NOTICE
Use caution to avoid contact with the fuel tank when removing the seat.
  1. Grasp the front edge of the seat and pull upward abruptly to disengage the seat base grommet from the seat mount stud.Image
  2. Lift the seat to disengage the seat base from the rear frame.
  3. To reinstall the seat, make sure the tabs on the seat base fully engage the rear frame section, then press downward firmly at the front edge of the seat to snap the stud to the seat base grommet.
WARNING
If the seat is not aligned in a straight-ahead position, the grommet is not engaged to the stud. Make sure the grommet is fully engaged to the stud before operating.

Scout Bobber Twenty (Non-North America)

NOTICE
Use caution to avoid contact with the fuel tank when removing the seat.
  1. Remove the two bolts holding the seat to the seat frame using the included uni-tool.
  2. Remove the four bolts holding the seat frame to the bike.
  3. If trying to access the battery, remove the two bolts holding the cover to the bike.
Image
Image
Image

© Copyright Polaris Inc. All rights reserved.