Content Source: 2021 Indian Challenger Owner’s Manual (9931587 R01) > Instruments, Features and Controls Chapter

IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle.Always follow the warnings and instructions in Owner's Manual.

Click the CONTENTS link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com

Switch Symbols

Symbol Switch Description
Image
Horn Switch Press the horn switch to sound the horn.
Image
High Beam Headlight Switch The high headlight beam switch activates the high headlight beam. See High/Low Headlight Beam Switch.
Image
Low Beam Headlight Switch The low headlight beam switch activates the low headlight beam. Press down momentarily to activate Flash to Pass. See High/Low Headlight Beam Switch.
Image
Turn Signal Switch Move the switch to the left to activate the left turn signals. Move the switch to the right to activate the right turn signals. A signal will deactivate automatically when speed or distance reach predetermined levels. To cancel a signal manually, move the switch to the center position and push it inward.Momentary Feature: Move the turn signal switch left or right and hold it in that position for at least one second. The momentary feature will activate and the signal will then cancel when the switch is released.
Image
Emergency Flasher Switch (Hazard Switch) The hazard switch activates and cancels the emergency flashers. See Hazard Switch.
Image
Screen List Select Switch The Screen List Select Switch (if equipped) is used to navigate through rider screens.
Image
Audio Control Switch The Audio Control Switch allows users to control the audio system features from the left control block.
Image
Stop Switch Press the bottom of the switch (RUN) to allow the engine to start and run. Press the top of the switch (STOP) to stop the engine. See Engine Stop/Run Switch.
Image
Starter Switch Use the starter switch to start the engine. The engine stop/run switch must be in the RUN position. See Engine Stop/Run Switch.
Image
Power Switch Press and release the power switch to enable or disable all electrical power to the vehicle. See Power Switch.
Image
Left-Hand Trigger Switch Use the left-hand switch to back out of menus, decline dialog boxes, hang up phone calls, and toggle through display screens. See Toggle Switches.
Image
Right-Hand Trigger Switch Use the right-hand switch to navigate through menus or accept dialog boxes on Ride Command display.

© Copyright Polaris Inc. All rights reserved.