Content Source: 2021 Indian Challenger Owner’s Manual (9931587 R01) > Maintenance Chapter

IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle.Always follow the warnings and instructions in Owner's Manual.

Click the CONTENTS link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com

Mechanical Clutch Lever Lubrication

Image
  1. The clutch cable adjuster nut is located on the bottom of the clutch cover on the engine. Loosen the lock nut.
  2. Turn the cable adjuster completely inward to provide maximum lever freeplay.
  3. Remove the clutch lever c-clip and pin . Disconnect the clutch cable from the clutch lever.
  4. Remove any old grease and dirt from the lever and housing. Lubricate the clutch lever and pin with moly assembly grease or all-purpose grease.
    NOTICE
    During installation of the lever, be aware of the internal clutch switch. Improper assembly can cause damage to the switch.
  5. Reconnect the clutch cable. Reinstall the lever C-clip and pin.
  6. Adjust clutch lever freeplay. See Mechanical Clutch Lever Freeplay.
  7. Tighten the adjuster nut and slide the protective cover over the adjuster.

© Copyright Polaris Inc. All rights reserved.