Content Source: 2021 Indian Heavyweight Owner’s Manual (9931551 R01) > Maintenance Chapter

IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle.Always follow the warnings and instructions in Owner's Manual.

Click the CONTENTS link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com

Seat Removal (Powered Seats)

To remove powered seats, do the following:
  1. Remove the left side cover to access the tool kit.
  2. Disconnect the trunk harness from the main harness.
  3. Remove the trunk.
  4. Remove the right side cover.
  5. Locate the seat mount brackets under the edge of the driver’s seat. There are two seat mount brackets, one on each side of the vehicle. Remove both seat mount bolts .Image
  6. Remove the rear bracket bolt , washer and nylon grommet from the passenger portion of the seat.
  7. Lift the rear of the seat and unplug the electrical connector (if equipped).
  8. Pull the seat rearward to disengage the front mounting tab of the seat from the frame mount. Do not allow the seat mount brackets to contact the rear fender.

© Copyright Polaris Inc. All rights reserved.