Switches

Content Source: 2021 RZR 570 Owner’s Manual (9931521 R02) > Features and Controls Chapter

IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle.Always follow the warnings and instructions in Owner's Manual.

Click the CONTENTS link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com

Switches

Ignition Switch
Light Switch (Base Model)

Instrument Cluster

12V Accessory Outlet

AWD Switch

Light Switch (LE Model)

Auxiliary Outlet

The vehicle is equipped with a 12-volt accessory outlet on the dash. Use the outlet to power an auxiliary light or other optional accessories or lights. For service, the dash outlet connection is under the dash.

Ignition Switch/Light Switch (Base Model)

Use the ignition switch to start the engine and to turn the lights on or off. The key can be removed from the switch when it is in the OFF position.

OFF	Turn the key to the OFF position to stop the engine. Electrical circuits are off.
LIGHTS ON	All lights are on. Electrical circuits are on. Electrical equipment can be used.
POSITION LIGHTS ON	The headlights are off. Position lights are on. Electrical equipment can be used.
START	Turn the key to the START position to engage the electric starter. See the Starting the Engine section for details.

Ignition Switch (LE Model)

The ignition switch is a three-position, key-operated switch. The key can be removed from the switch when it is in the OFF position.

OFF	The engine is off. Electrical circuits are off, except accessory 12V.
ON	Electrical circuits are on. Electrical equipment can be used.
START	Turn the key to the START position to engage the electric starter. The key returns to the ON position when released.

Light Switch (LE Model)

The ignition switch key must be in the ON/RUN position to operate the headlights. Press the top of the rocker switch toward the dash to place the headlights on high beam. Move the rocker switch to the center position to place the headlights on low beam. Press the bottom of the rocker switch to turn off the headlights.

All Wheel Drive (AWD) Switch (if equipped)

The AWD switch has two positions:

All Wheel Drive (AWD)
Two Wheel Drive (2WD)

Press the top of the rocker switch to engage All Wheel Drive. Press the bottom of the switch to operate in two wheel drive. See All Wheel Drive (AWD) System for AWD operating instructions.

AWD/Differential Lock Switch (if equipped)

The AWD/Differential Lock Switch has three positions:

All Wheel Drive (AWD)
Differential Lock/Two Wheel Drive (2WD)
Differential Unlock (1WD/Turf Mode)

Press the top of the rocker switch to engage All Wheel Drive (AWD). See Engaging AWD for operating instructions.

Move the rocker switch to the center position to lock the differential and operate in rear wheel drive. Press the bottom of the switch to unlock the differential and allow the two rear drive wheels to operate independently. See Locking the Differential and Unlocking the Differential/TURF Mode (LE Models Only) for operating instructions.

WARNING

Never operate in TURF mode (if equipped) while operating on a hill or other irregular terrain. Always move the AWD switch to AWD before ascending or descending a hill. See Unlocking the Differential/TURF Mode (LE Models Only).