Content Source: 2021 Timbersled SX 120 / ARO / RIOT Owner’s Manual (9931501 R01) > Maintenance Chapter

IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle.Always follow the warnings and instructions in Owner's Manual.

Click the CONTENTS link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com

Ski Maintenance

Timbersled recommends periodically inspecting your ski for damage.
  • Check the ski bolt to make sure it is tight. Torque to specification.
    TORQUE

    Ski Bolt

    33 ft-lbs (45 N·m)
    WARNING
    Failure to torque fasteners as directed will adversely affect the steering system and may lead to severe injury or death.
  • Inspect for cuts or peeled up plastic that will cause the ski to handle poorly.
  • Inspect for bent, broken, or worn-out ski skags.
  • Inspect the ski saddle for bends that may make the ski crooked.
  • Inspect the ski rubber to make sure it is not smashed or worn out.
NOTICE
DO NOT tie your bike against the front of the ski. This can permanently bend the plastic ski causing your bike to handle poorly.

© Copyright Polaris Inc. All rights reserved.