Content Source: 2021 Indy 120 Owner’s Manual (9931272 R01) > Maintenance Chapter

IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle.Always follow the warnings and instructions in Owner's Manual.

Click the CONTENTS link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com

Track Tension Adjustment

  1. Loosen the rear idler shaft bolt.
  2. Tighten or loosen the track adjusting screws to provide equal adjustment on both sides of the track.
  3. Repeat the measurement on the other side of the track.
    TIP
    Check tension more frequently when the machine is new.
    WARNING
    When performing the following checks and adjustments, stay clear of all moving parts to avoid serious personal injury. Make sure the track contains no objects that could be thrown out while the track is rotating. Keep clear of track. This includes but is not limited to hands, tools, feet and clothing. Make sure no one is standing close to the machine while the track is rotating.
  4. Start the engine and slowly rotate the track at least five revolutions. Allow the track to stop rotating by itself (do not apply brakes).
  5. Check and adjust track alignment. See Track Alignment.
  6. Tighten the idler shaft bolt to specified torque.
    TORQUE

    Idler Shaft Bolt

    35-40 ft-lbs (47-54 N·m)
  7. Readjust the toe block to proper spacing and tighten.

© Copyright Polaris Inc. All rights reserved.