Content Source: 2021 INDY VR1 / INDY XC / Switchback ASSAULT Owner’s Manual (9931271 R01) > The Perfect Fit Chapter

IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle.Always follow the warnings and instructions in Owner's Manual.

Click the CONTENTS link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com

Handlebar Angle Adjustment

caution
Take care to avoid damaging hand warmer/brake switch wires when moving components.

  1. Securing the handlebar clamp bolts with an Allen wrench, loosen each of the four nuts.
  2. Adjust the handlebar forward or rearward to the desired angle.
  3. Be sure the handlebar, brake lever and throttle lever operate smoothly and do not hit the gas tank, windshield or any other part of the machine when turned fully to the left or right. If necessary, adjust the left and right hand controls.

Image


  1. Tighten the top two handlebar clamp nuts, followed by the lower two. Do not over-torque.
    TORQUE

    Handlebar Clamp Bolts

    11 ft-lbs (15 N·m)

© Copyright Polaris Inc. All rights reserved.