Content Source: 2021 600R Owner’s Manual (9931266 Rev 01) > The Perfect Fit Chapter

IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle.Always follow the warnings and instructions in Owner's Manual.

Click the CONTENTS link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com

Optional Rear Suspension Mounting Holes

IMPORTANT
Every hole position must match on both sides of the vehicle. Do not mix A and B positions. If mixing of A and B hole positions occurs, the rear suspension will not function properly and damage may occur.
Image
Your vehicle is equipped with optional rear suspension mounting holes. The factory installed and preferred setting is the A position. If a drastic reduction in ski pressure is desired, you can move the labeled geometry points to the B position. The 6 adjustable points are as follows:

  • Torsion Spring Hanger Hole
  • Front Coupling Block Hole
  • Lower Rear Pivot Arm Hole
  • Rear Coupling Block Hole
  • Front Tunnel Torque Arm Hole
  • Rear Tunnel Torque Arm Hole

Image

© Copyright Polaris Inc. All rights reserved.