Content Source: 2020 Indian Scout Bobber / Bobber 20 Owner’s Manual (9931167 ) > Maintenance Chapter

IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle.Always follow the warnings and instructions in Owner's Manual.

Click the CONTENTS link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com

Front Brake Lever

  1. To lubricate the front brake lever, start by removing the plastic cap from the pivot pin . Unscrew the bottom nut and pivot pin to access the hinge point .
  2. Lubricate the pivot pin and brake lever hinge point at the intervals recommended in the Periodic Maintenance Table section. Also lubricate any time binding is evident. Use all-purpose grease.

    Image

  3. Inspect brake pads as outlined on Brake Pads.
  4. Once properly lubricated, reinstall the components in accordance with their proper torque values. Return plastic cap to the top of the pivot pin.
    TORQUE: Pivot Pin: 8.9 — 17.7 in-lbs (1–2 Nm)
    TORQUE: Nut: 35.4 — 62 in-lbs (4–7 Nm)

© Copyright Polaris Inc. All rights reserved.