Content Source: 2020 Indian Challenger Rider’s Manual (9931163 R02) > Maintenance Chapter

IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle.Always follow the warnings and instructions in Owner's Manual.

Click the CONTENTS link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com

Shock Preload Adjustment

To adjust the shock preload, perform the following procedure:
  1. Remove left-hand side cover. See Side Covers.
  2. Look up suspension setting for the specific loading according to chart (decal applied to the inside of the left-hand upper body panel).
  3. Use the 10 mm speed wrench and extension provided in the tool kit to set adjuster to proper setting .
Image
NOTE
The numbers are biased towards the line which they represent.

Total Cargo + Riders (lbs)

Adjustment Setting

CAUTION: DO NOT USE IMPACT TOOLS OR EXCEED 10 FT-LBS OF TORQUE WHEN ADJUSTING. DAMAGE TO COMPONENTS MAY OCCUR.

0 – 175

1

175 – 250

2

250 – 325

3

325 – 425

4

425 – 500

5

© Copyright Polaris Industries Inc. All rights reserved.