Content Source: 2020 Indian Challenger Rider’s Manual (9931163 R02) > Maintenance Chapter

IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle.Always follow the warnings and instructions in Owner's Manual.

Click the CONTENTS link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com

Fuel Tank Removal

WARNING
Allow engine and exhaust to cool completely before disconnecting fuel line or removing tank. Protect fuel tank finish when removing, storing, and installing tank.
  1. Remove seat. See Seat Removal.
  2. Remove left hand v-cover by removing its fasteners .

    Image

  3. Disconnect fuel feed line .

    Image

  4. At the rear of the tank, disconnect the fuel vent line and the fuel pump electrical connector .
    IMPORTANT
    On models equipped with an EVAP system, remove the EVAP vent line located above EVAP canister on the right-hand side of the fuel tank.

    Image

  5. Remove fuel tank fastener .
  6. Lift rear of tank upward and pull rearward to remove. Place the fuel tank in a secure location with a drain pan positioned to catch any fuel that may leak or drip from disconnected hoses or fittings.
    IMPORTANT

    Disconnect the fuel feed line from the bottom of the fuel tank during removal.

© Copyright Polaris Industries Inc. All rights reserved.