Content Source: 2020 Indian FTR 1200 Owner’s Manual (9931115 R02) > Pre-Ride Inspections Chapter

IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle.Always follow the warnings and instructions in Owner's Manual.

Click the CONTENTS link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com

Sprocket Inspection

NOTICE
Drive chain and sprocket service life are maximized and drive line noise minimized by proper cleaning. Cleaning interval is approximately every tire change, or more often if operated in dirty, dusty, or high debris environments.
Clean the chain using a chain brush or clean rag to remove any dirt or grit. The chain must be lubricated using Indian Motorcycle chain lube (2884172).
caution
Always have the motorcycle off and the transmission in neutral when performing this procedure.
caution
Do not use a de-greaser to clean the chain. De-greaser may damage the chain o-rings and cause premature wear.
  1. Inspect front and rear sprocket teeth for wear or damage from foreign material.

    Image

  2. Closely inspect drive chain condition.
Things to look for:
  • wear pattern - ensure even wear throughout sprocket
  • cracks
  • missing teeth
  • uniform teeth size

© Copyright Polaris Inc. All rights reserved.