Content Source: 2020 Indian FTR 1200 Owner’s Manual (9931115 R02) > Maintenance Chapter

IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle.Always follow the warnings and instructions in Owner's Manual.

Click the CONTENTS link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com

Headlight Removal

  1. Remove the windshield.
  2. Remove and retain two screws from top of headlight bracket.

    Image

  3. Remove and retain two screws from bottom of headlight bracket.
    TIP
    Turn handlebars lock-to-lock to access two screws from rear-side.
  4. With headlight assembly unmounted, tilt assembly forward and slide electronic throttle control (ETC) connection off push-pin clip. It is not necessary to disconnect harnesses. Image
  5. Disconnect headlight from chassis harness. Headlight connector will remain installed onto push-pin clip.
  6. Carefully set headlight assembly aside on soft surface as to not scratch finished surfaces.

© Copyright Polaris Inc. All rights reserved.