Content Source: Polaris Power® P3200iE Owner’s Manual (9931063 R03) > Maintenance Chapter

IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle.Always follow the warnings and instructions in Owner's Manual.

Click the CONTENTS link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com

Syncing the Remote Fob

NOTICE
The steps below should used after first attempting all other troubleshooting options. See Remote Start Fails.

Have both fobs on-hand when starting the sync process.

  1. Remove battery access panel by removing the two screws.
  2. Press the ignition switch to the RUN position.
  3. Press button inside the battery compartment.

Image
  1. Turn the fuel valve switch ON.

  1. On the remote fob, quickly press the ON button of each fob. Ensure the green light flashes at the top of the fob.
  2. Press OFF button on each fob.
  3. Press button inside the battery compartment again.

Image

NOTICE
If the fob does not successfully connect, turn fuel valve switch and ignition switch to OFF and restart the process.

Image

© Copyright Polaris Inc. All rights reserved.