Content Source: Polaris Power® P3200iE Owner’s Manual (9931063 R03) > Assembly Chapter

IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle.Always follow the warnings and instructions in Owner's Manual.

Click the CONTENTS link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com

Extension Cord Hooks

Image
NOTICE
A socket wrench and Allen wrench will be needed for assembly.

Parts

Ref. No. Description Quantity
Left Cord Hook 1
Hex Screw 1
Left Hook Base 1
Right Cord Hook 1
Hex Nut 1
Right Hook Base 1
Handle Cap 1

Left Hook Assembly

  1. In the left rear corner of the generator, remove inner hex screw using an Allen wrench.
Image
  1. Insert hook base into opening on the frame.
  2. Insert screw and tighten with an Allen wrench.
  3. Twist the hook into the base and tighten. The hook end should face outward.
Image

Right Hook Assembly

  1. In left front corner of the generator, remove cap from the generator’s handle.
Image
  1. Remove hex nut from screw.
  2. Slip hook base onto exposed screw.
Image
  1. Secure base with hex nut using a socket wrench.
  2. Twist the hook into the base and tighten. Hook end should face outward.

© Copyright Polaris Inc. All rights reserved.