Content Source: Polaris Power® P3200iE Owner’s Manual (9931063 R03) > Maintenance Chapter

IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle.Always follow the warnings and instructions in Owner's Manual.

Click the CONTENTS link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com

Air Filter

WARNING
Do not use gasoline or low flash point solvents for cleaning. They are flammable and explosive under certain conditions.
NOTICE
An obstructed air filter restricts air flow to the carburetor. To prevent carburetor malfunction, regularly service the air filter. Service more frequently when operating generator in extremely dusty conditions.
  1. Detach maintenance cover.
  2. If necessary, move fuel hoses out of the way to expose air box.
  3. Remove two screws to open the air box.
  4. Extract air filter from box.
Image
  1. If filter is dirty or torn, replace it with a new one.
  2. Re-install air box cover and secure with screws.
  3. Move fuel hoses back into position.
  4. Re-install the maintenance cover.
IMPORTANT
When replacing the filter, check that the filter is not pinched between the air box covers to ensure a proper seal.

Foam Filters

If using a foam air filter, follow the steps below to clean the filter before replacing it in the air box.
  1. Submerge the filter in a solution of warm water and household detergent.
  2. Let the filter soak in the solution for a few minutes and then squeeze out the excess water.
  3. Repeat step 2 several times to ensure the water coming from the filter is clean. Then let the filter dry completely.
  4. Once dry, pour air filter oil onto the filter and distribute evenly. Be sure to rid the filter of excess oil.
    NOTICE
    The use of air filter oil allows the filter to catch even the smallest particles of dirt and dust.
  5. If at any point during the cleaning process the filter becomes damaged, then it must be replaced prior to operating your generator.

© Copyright Polaris Inc. All rights reserved.