Content Source: Polaris Power® P2000i Owner’s Manual (9931062 R01) > Maintenance Chapter

IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle.Always follow the warnings and instructions in Owner's Manual.

Click the CONTENTS link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com

Removing the Maintenance Cover

Use the following steps to remove the generator maintenance cover and gain access to the inner components. Before performing any maintenance, the engine switch should be positioned to OFF.
  1. Position the engine switch, fuel valve switch, and fuel vent to OFF.
  2. Remove the two screws from the maintenance cover.
  3. Remove the cover to expose the inner components of the generator.
  4. Perform maintenance as needed.
Image
  1. Upon completion of maintenance, replace cover by inserting the bottom edge into the grooves and replacing the two screws.
  2. Position the ignition switch to the ON position to allow generator operation.

© Copyright Polaris Inc. All rights reserved.