Air Conditioning Operation

Content Source: Polaris Power® P2000i Owner’s Manual (9931062 R01) > Operation Chapter

IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle.Always follow the warnings and instructions in Owner's Manual.

Click the CONTENTS link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com

Air Conditioning Operation

Bring the generator to a normal operating temperature before applying the air conditioning load. Always allow a two-minute wait period when manually cycling an air conditioner off and on.

A longer wait period may be required under unusually hot weather conditions. All other loads should be turned off until the air conditioner has started and is performing normally.

Before applying an air conditioning load, ensure that your generator is rated to handle to the load. Use the table below and the formula included in the AC Operation chapter for reference.

AC Output	Running (Rated) Watts	Additional Starting (Surge) Watts
Window AC - 10,000 BTU	1200	3600
Window AC - 12,000 BTU	3250	9750
Central AC - 10,000 BTU	1500	4500
Central AC - 24,000 BTU	3800	11400
Central AC - 40,000 BTU	6000	18000

NOTICE

Follow the air conditioner manufacturer's instructions for starting and restarting for proper operation. Some air conditioner manufacturers offer a start capacitor as an extra cost option.

The lack of a start capacitor can cause the air conditioner to draw too high a starting current and overload the generator. Contact your air conditioner dealer if you consistently have problems starting your air conditioner with the generator.