Content Source: Polaris Power® P2000i Owner’s Manual (9931062 R01) > First Use Instructions Chapter

IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle.Always follow the warnings and instructions in Owner's Manual.

Click the CONTENTS link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com

Adding Engine Oil

NOTICE
This engine uses SAE 5W-30 generator engine oil. Failure to use the recommended 4-stroke engine oil may result in engine damage, see the Specifications section for oil capacity.

  1. Place generator on flat, level surface. Remove the maintenance cover.
  2. Remove the oil filler cap / dipstick.
  3. Fill the engine crankcase with the specified amount.

Image
  1. Insert the dipstick into the filler neck, without screwing it in.
  2. Remove the dipstick and verify that the oil level is at the upper limit. Add additional oil and inspect the level as needed until the upper limit has been reached.
  3. Re-install the dipstick. Use a clean shop rag to clean any spilled oil.
  4. Re-install the maintenance cover.

© Copyright Polaris Inc. All rights reserved.