Switches

Content Source: 2020 PRO XD Diesel Owner’s Manual (9930999 R01) > Features and Controls Chapter

IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle.Always follow the warnings and instructions in Owner's Manual.

Click the CONTENTS link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com

Switches

Ignition Switch

The ignition switch is a three-position, key-operated switch. The key can be removed from the switch when it is in the OFF position.

OFF	The engine is off. Electrical circuits are off, except for the driver’s side auxiliary outlet and the Pulse Bar.
ON	Vehicle is on. All electrical equipment can be used. When first keyed on, glow plugs activate for 12 seconds and then deactivate. The indicator on the gauge displays when glow plugs are active.
START	Turn the key to the START position to engage the starter. The key returns to the ON position when released.

Light Switch

The ignition switch key must be in the ON/RUN position to operate the headlights. Press the top of the switch to place the headlights on high beam. Move the switch to the center position to place the headlights on low beam. Press the bottom of the switch to turn off the headlights.

4x2 Differential Lock Switch (if equipped)

NOTE

Only 2000D 4x2 models will have a Differential Lock switch.

The Differential Lock switch has two positions: Differential Lock/Two Wheel Drive (2WD) and Turf Mode. Press the top of the switch to engage Two Wheel Drive (2WD). Press the bottom of the switch to unlock the differential and operate in Turf Mode.

AWD Switch (if equipped)

The AWD switch has three positions: All Wheel Drive (AWD), Differential Lock/Two Wheel Drive (2WD) and Off (1WD/Turf Mode).
Press the top of the switch to engage All Wheel Drive (AWD).
Move the switch to the center position to lock the differential and operate in two wheel drive (2WD).
Press the bottom of the switch to unlock the differential and allow the rear drive wheels to operate independently (1WD). This mode of operation is well suited to turf driving or when active traction is not needed.