Content Source: 2020 Ranger Diesel Tractor Owner’s Manual (9930940 R02) > Maintenance Chapter

IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle.Always follow the warnings and instructions in Owner's Manual.

Click the CONTENTS link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com

Vehicle Immersion

WARNING
If your vehicle becomes immersed, major engine damage can result if the machine is not thoroughly inspected. Take the vehicle in for service before starting the engine. Your POLARIS dealer can provide this service.
If it's impossible to take your RANGER to a dealer before starting it, follow the steps outlined below:
  1. Move the vehicle to dry land or at the very least, to water below the footrests.
  2. Dry any water present in the air box. Filter replacement is required if water is present.
  3. Remove the glow plugs. Turn the engine over several times using the electric start.
  4. Dry the glow plugs and reinstall, or replace with new plugs.
  5. Attempt to start the engine. If necessary, repeat the drying procedure.
  6. Take the vehicle in for service as soon as possible, whether you succeed in starting it or not. Your POLARIS dealer can provide the required service.
  7. If water has been ingested into the PVT follow the procedure for drying.

© Copyright Polaris Industries Inc. All rights reserved.