Content Source: 2020 Slingshot Owner’s Manual (9930921 R01) > Maintenance Chapter

IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle.Always follow the warnings and instructions in Owner's Manual.

Click the CONTENTS link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com

Fuse Replacement

There are two fuse boxes located under the hood.
The first fuse box is located near the brake fluid reservoir. The six main system fuses are located in the battery compartment (seven for Canadian models).
Image
  1. Open the hood.
  2. Lift the locking tabs and remove the cover.Image
  3. Remove the spent fuse.
    NOTICE
    Always use the recommended fuse to prevent electrical system damage. Refer to the label on the fuse box cover.
  4. Install the new fuse.
  5. Reinstall the fuse box cover.

  • US Models
  • Image

  • Canadian Models
  • Image
The second fuse box is located closer to the front.

(Canadian Models Only)

Chassis-3

40A

Chassis-2

40A

VCM

20A
 

PEPS

40A
 

Engine

40A

ABS

50A

Chassis-1

40A

Image
  1. Open the hood.
  2. Lift the yellow locking tabs, then squeeze the fuse box cover tabs inward and remove the cover.
  3. Use the fuse puller provided in the tool kit to remove the spent fuse.
    NOTICE
    Always use the recommended fuse to prevent electrical system damage. Refer to the label on the fuse box cover.
  4. Install the new fuse.
  5. Reinstall the fuse box cover.

© Copyright Polaris Inc. All rights reserved.