This POLARIS vehicle
is equipped with three-point lap and diagonal seat belts on all seats.
Always make sure the seat belts
are secured for all riders before operating. The driver’s
seat belt is equipped with a seat belt interlock. Vehicle speed
will be limited to 15 miles per hour if the seat belt
is not secured.
WARNING |
Falling from a moving vehicle could result in serious injury or death.
Always fasten your seat belt securely before operating
or riding. |
To wear the seat belt
properly, follow this procedure:
- For 3-point belts
with D loops , pull the seat
belt latch downward and across your chest toward the buckle at the inner edge of the seat. The belt should fit
snugly across your hips and diagonally across your chest. Make sure
the
belt is not twisted.
- Push the latch plate
into the buckle until it clicks.
- Release the strap,
it will self-tighten.
- To release the seat
belt, press the square red button in the buckle’s center.
Seat Belt Inspection
Inspect all seat
belts for proper operation before each use of the vehicle.
- Push the latch plate
into the buckle until it clicks. The latch plate must slide smoothly
into the buckle. A click indicates
that it's securely latched.
- Push the red release
latch in the middle of the buckle to make sure it releases freely.
- Pull each seat belt
completely out and inspect the full length for any damage, including
cuts, wear, fraying or stiffness.
If any damage is found, or if the seat
belt does not operate properly, have the seat belt system checked
and/or replaced by
an authorized POLARIS dealer.
- To clean dirt or
debris from the seat belts, sponge the straps with mild soap and water.
Do not use bleach, dye or household
detergents.