Content Source: RideCommand User’s Guide (9930905 R01) > Dynamix™ Active Suspension Chapter

IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle.Always follow the warnings and instructions in Owner's Manual.

Click the CONTENTS link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com

Demonstration Mode

When the vehicle is first keyed on, and the shift lever is in the Park (P) position with the engine not running, the SCM will enter a demonstration mode. The suspension will react to the operator inputs as if the vehicle was being driven. After a period of time (5 minutes), the SCM will exit demonstration mode and stop driving the shocks to conserve vehicle power. The vehicle will enter normal operation if the engine is started.
NOTICE
The vehicle will enter demonstration mode any time the shift lever is in the park position (P), the engine speed is at 0 rpm, and the vehicle speed is at 0 mph. Demonstration mode will time out after 5 minutes.
NOTICE
Demonstration mode exaggerates responses for the purpose of demonstration. Actual usage requires real speed and dynamic events to illicit the same visual response in the interface.

© Copyright Polaris Inc. All rights reserved.