Content Source: 2020 RANGER XP 1000 Tractor Owner’s Manual (9930870 R01) > Features and Controls Chapter

IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle.Always follow the warnings and instructions in Owner's Manual.

Click the CONTENTS link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com

Park Brake Lever

Always apply the service brakes before engaging or releasing the park brake. To help prevent the vehicle from rolling, set the park brake when parking the vehicle. When the park brake is set and the park brake indicator is illuminated, engine speed is limited. If the accelerator is applied, this limiting feature prevents operation, which protects the park brake pads from excessive wear.

Image
TIP
This feature will not operate properly if the park brake connector or switch malfunctions or becomes disconnected, or if the switch has moved. Check for disconnection, then see your dealer or other qualified service person promptly if this feature fails to operate properly.
  1. To set the park brake, apply the brakes. Pull the park brake lever towards yourself as far as possible.
  2. To release the park brake, apply the brakes. Turn the park brake lever counterclockwise and push it in as far as possible.

© Copyright Polaris Industries Inc. All rights reserved.