Content Source: 2020 GEM e2/e4/e6 International Owner’s Manual (9930626 ) > Operation Chapter

IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle.Always follow the warnings and instructions in Owner's Manual.

Click the CONTENTS link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com

Driving Procedure

  1. Disconnect the charging cable.
  2. Sit in the driver's seat and fasten the seat belt. Make sure passengers are seated with seat belts secured.
  3. Adjust mirrors as needed.
  4. Turn the key clockwise to the ON position.
  5. Apply the brakes.
  6. Release the park brake.
  7. Move the direction switch to the desired position.
  8. Check your surroundings and determine your path of travel.
  9. Keeping both hands on the steering wheel, release the brake pedal and gradually push the accelerator toward the floor to begin driving.
  10. Drive slowly. Practice maneuvering and using the accelerator and brakes on level surfaces.
  11. Before turning, activate a turn signal to alert others of your intentions.
  12. Do not carry a passenger until you have at least two hours of driving experience with this vehicle. Allow a passenger to ride only in a designated passenger seat with seat belt secured.
  13. To stop the vehicle, release the accelerator pedal completely and brake to a complete stop.
    NOTICE
    Always bring the vehicle to a complete stop before changing the position of the direction switch.
  14. Set the park brake.
    WARNING
    A rolling vehicle can cause serious injury or death. Always set the park brake when leaving the vehicle unattended.
  15. Turn the key off.
  16. Recharge the batteries daily, or after each use of the vehicle.

© Copyright Polaris Inc. All rights reserved.