Content Source: 2020 Indian Chief, Chieftain, Springfield and Roadmaster Rider’s Manual (9930566 R03) > Maintenance Chapter

IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle.Always follow the warnings and instructions in Owner's Manual.

Click the CONTENTS link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com

Seat Installation (ROADMASTER)

  1. Position the seat by inserting the seat mounting tab from rear to front into the mount on the top of the frame.
  2. Reconnect the seat heater.
  3. Rotate the rear of the seat downward and position the side mount seat brackets onto the frame. Do not allow the seat mount brackets to contact the rear fender.
  4. On each side, thread the seat mount bolt through the seat mount bracket and into the frame. Torque seat bolts to specification.
    TORQUE
    18 ft-lbs (24 Nm)
  5. Gently raise the rear bracket and reinstall the nylon grommet. Thread the rear bracket bolt and washer through the bracket and nylon grommet. Torque the bolt to specification.
    TORQUE
    96 in-lbs (10.8 Nm)
  6. Reconnect the trunk harness to the main harness.
  7. Reinstall the trunk.

© Copyright Polaris Industries Inc. All rights reserved.