Content Source: 2020 Indian Chief, Chieftain, Springfield and Roadmaster Rider’s Manual (9930566 R03) > Instruments, Features and Controls Chapter

IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle.Always follow the warnings and instructions in Owner's Manual.

Click the CONTENTS link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com

Saddlebags (if equipped)

Do not exceed the weight limit of each saddlebag. Always distribute weight evenly in each of the saddlebags. Refer to the saddlebag/cargo warning label on or near the saddlebag for cargo capacity.
Hard bag capacity is 22 lbs. (10 kg) of cargo per side.
Soft bag capacity is 15 lbs. (6.8 kg) of cargo per side.

Hard Bag Removal

  1. Remove the left and right side covers.
  2. Unlock the electric saddlebag locks (if equipped).
    TIP
    The provided key can also be used in the latch release buttons to unlock the saddlebag lids.
    Image
  3. Disconnect the saddlebag lock wiring near the seat .
  4. Press the lid latch release button and lift the lid.
  5. Remove the saddlebag fastener bolts .
    Image
  6. Tilt the saddlebag away from the frame of the vehicle to remove it.
  7. To reinstall, place the hard bag in a fully seated position on the muffler.
  8. Insert saddlebag fastener bolts and torque to specification.
    TORQUE
    18 ft-lbs (24 Nm)
  9. Reconnect the electrical wiring.
  10. Reinstall the side cover, using care to avoid damaging electrical wires.
    WARNING
    Improper saddlebag installation can result in loss of control, accident and driving hazards for other motorists (if saddlebag falls from the motorcycle). Always make sure saddlebag are mounted properly.

Soft Bag Removal

  1. Unbuckle the saddlebag lid clasps and open the lid.
  2. Remove the saddlebag fastener bolts.
  3. Lift the saddlebag straight up, and then straight out to remove.
    WARNING
    Improper saddlebag installation can result in loss of control, accident and driving hazards for other motorists (if saddlebag falls from the motorcycle). Always make sure saddlebag are mounted properly.
  4. To reinstall, place the soft bag in position.
  5. Install the saddlebag fastener bolts and torque to specification.
    TORQUE
    18 ft-lbs (24 Nm)

© Copyright Polaris Industries Inc. All rights reserved.