Content Source: 2020 Indian Chief, Chieftain, Springfield and Roadmaster Rider’s Manual (9930566 R03) > Instruments, Features and Controls Chapter

IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle.Always follow the warnings and instructions in Owner's Manual.

Click the CONTENTS link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com

Ride Command

Overview

Image
For the latest information about your Ride Command display, including software updates, please visit https://ridecommand.indianmotorcycle.com
NOTE
Using the display for an extended period of time while the vehicle’s engine is off can drain the battery.
WARNING
Do not enter information while operating your vehicle. Failure to pay attention to operating your vehicle could result in loss of control, injury, or death. You assume all risks associated with using this device. Read your User Guide.
WARNING
Driving while distracted can result in loss of vehicle control, crash, and injury. We strongly recommend that you use extreme caution when using any device that may take your focus off the road. Your primary responsibility is the safe operation of your vehicle. We recommend against the use of any hand-held device while driving and encourage the use of voice-operated systems when possible. Make sure you are aware of all applicable local laws that may affect the use of electronic devices while driving.
Before riding with your new display, do the following:
  • Read this entire manual.
  • Familiarize yourself with the features and operations of the display while the vehicle is stationary.
  • Download the Indian Ride Command app from the Apple/Google Play store and create your personalized account.
  • Check http://www.polaris.com/en-us/rider-support/owners-manual for the latest updates to the owner’s manual.

Touchscreen Display Compliance Statement

Notice: This device complies with part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference received including interference that may cause undesired operation.
Per RSS-Gen, Section 8.4, this device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.”
Polaris International hereby declares that the radio equipment in-vehicle display unit is in compliance with the following directives:
  • 2014/53/EU European Radio Equipment Directive
  • 2011/65/EU RoHS 2011/65/EU (Recast)
  • 2015/863 RoHS July 22, 2019
The full text of the EU declaration of conformity is available at the following internet address: www.polaris.com/compliance
Per 47 CFR 15.21, the user’s manual for instruction or an intentional or unintentional radiator shall caution the user that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
caution
This equipment complies with part 15 of the Federal Communications Commission (FCC) rules.
These requirements are intended to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
caution
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications to this equipment not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Ride Command Buttons

Button Function

Rider Screen

Image

Press the Rider Screen button to access the customizable split screen menu system, access to ride data, vehicle status, and vehicle information.

Navigation

Image

Press the Navigation button to access Ride Command navigation features (if equipped), find directions, and look up addresses, gas stations, and other points of interest.

Controls

Image

Press the Controls Button to access the INDIAN Badge Panel and additional settings.

Device Manager

Image

Press the Device Manger button to pair a phone or headset to the Ride Command display.

Audio

Image

Press the Audio Button to change the audio source, adjust volume level, and set radio presets.

Rider Screen

The Rider Screen is a customizable split screen menu system that provides unique access to ride data, vehicle status, and vehicle information. The Rider Screen also provides easy access to other often used features, such as Audio controls, Bluetooth features, and Maps.

Image

Navigation

Press the Navigation button to access Ride Command navigation features (if equipped), find directions, and look up addresses, gas stations, and other points of interest.

Image

Control Panel

Image
From the Control Panel you can access settings, adjust display brightness, select ride mode, and vehicle climate controls.

You can access the Control Panel at anytime by pressing the gear button on the gauge.

Device Manager

The Device Manager screen displays recent calls, contact list, key pad, and messages. The display will only show messages received while smart-phone is paired via Bluetooth.

Image

Audio Screen

The Audio screen allows you to access music stored on your smart-phone or other music device. You can pair your device using Bluetooth, or by connecting it to the display’s USB port.

USB audio playback is only available on flash drives formatted to ex-FAT or FAT32. Playback from an iOS devices is only available on iPhone 5S models or later.

Image

Ride Command Hand Controls

Media Switch

Image
Use the 5–way media switch to do the following:
  • Press center to mute
  • Press up/down to increase/decrease volume.
  • Press left/right to move to previous/next track.
  • Long press to activate Push to Talk.

Select Switch

Image
Use the 3–way select switch to do the following:
  • Press up and down to navigate display screen.
  • Press center to select.

Trigger Switches

Image
There are trigger switches located on the reverse side of both the right and left switch cubes.
Use the trigger switches to do the following:
  • Press the right trigger switch to confirm selection.
  • Press the left trigger switch to back out of menu screens.


Ride Command Ride Modes

Image
You can choose between three ride modes, Tour, Standard, or Sport for an experience customized to your riding style. The throttle map for each ride mode was designed with a specific application in mind, resulting in one motorcycle with three distinct personalities.
NOTE
For the ride mode to change the throttle must be fully disengaged. If you change the ride mode while the throttle is engaged, a spinning icon will appear indicating that the ride mode has not yet changed. Once the throttle is disengaged the icon will disappear and the ride mode will change.

Tour

Tour mode provides a smoother throttle respond ideal for riding with a passenger or for long touring rides.

Standard

Standard mode features a crisp throttle response and well-balanced power delivery for responsive passing power and predictable, slow-speed handling.

Sport

Sport mode is designed for situations when instant response is needed. Sport mode quickens the throttle response and has a more aggressive power delivery for increased acceleration.

Ride Command Settings

From the Settings Menu you can view important details about your vehicle and personalize your touchscreen display. The settings menu is comprised of four categories: Information, General, Time, and Vehicle.

General Information

From the Information settings menu you can view the following:
  • Vehicle Identification Number (VIN)
  • Mileage
  • Installed Software Version
  • Oil Change Interval

General Settings

From the General settings menu you can do the following:
  • Themes (Day/Night/Auto)
  • Manage Bluetooth Devices
  • Change the Language
  • Set the Speed Units of Measure (MPH or KPH)
  • Set the Temperature Units (F or C)
  • Update Software

Clock

From the Time Settings you can do the following:
  • Set the Time Format (12 hour or 24 hour)
  • Enable GPS Time (automatically sets the time to the time zone you are currently in)
  • Set Time (if GPS Time is not enabled)
NOTE
The clock is sourced from the GPS chip and periodically requires GPS lock to function correctly.
NOTE
Clock reading will be non-existant or inaccurate after disconnecting battery and will require a new GPS sync to function properly.

Vehicle Information

From the Vehicle Settings you can do the following:
  • Oil Life/ Service Reset
  • Access Vehicle Diagnostics

Download New Software and Maps

For the latest software and maps for Ride Command, go to https://ridecommand.indianmotorcycle.com.
NOTE
The display will automatically restart after a software and map update.
NOTE
For map updates, a 32GB or greater USB drive formatted to exFAT is required.

Bluetooth Pairing

The Ride Command touchscreen display can be connected to a smart-phone and a headset simultaneously.
To pair a device, do the following:
  1. From the Bluetooth Devices settings screen, the Phone screen, or the Music screen, tap on the Add Device button to bring up the pairing prompt.
  2. Put your Bluetooth device into pairing mode.
  3. Select the name of the device you want to pair from the touchscreen display to finish the pairing process.
  4. Confirm pairing (if applicable). Depending on the device you are pairing to the display you may be prompted to confirm pairing.

Connected Services

Certain Ride Command equipped models include connected services, provided for a limited time starting on the date of purchase. The features include real time traffic, weather, and enhanced destination search capabilities. To check your connected service status and to renew, go to:http://ridecommand.indianmotorcycle.com.

Update Software

For the latest software for Ride Command, go to:
https://ridecommand.indianmotorcycle.com.
The display software can be updated by connecting a USB stick containing the latest software version to the USB port located on the bottom left of the display. The Update Software menu in Settings will list any available updates on the USB stick. Choose the correct version and wait for the update to complete before removing the USB stick. The touchscreen display will automatically restart when software is updated.
NOTE
A USB 2.0 or USB 3.0 flash drive formatted to ex-FAT is required to successfully perform an update. The display will not recognize flash drives that do not meet these requirements.
IMPORTANT
Do not remove power from the display during the update process.

USB Port

The USB Port makes it easy to power devices, such as phones, audio sources, or GPS units, in addition to allowing you to stream music through the LCD display to your Bluetooth headset. On models equipped with a Ride Command display, the USB port is also used to update the display software. For the latest software, go to https://ridecommand.indianmotorcycle.com.
IMPORTANT
Due to harsh riding environments, Indian Motorcycle recommends using USBs with retention features
Image

© Copyright Polaris Industries Inc. All rights reserved.