Content Source: 2020 Indian Chief, Chieftain, Springfield and Roadmaster Rider’s Manual (9930566 R03) > Maintenance Chapter

IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle.Always follow the warnings and instructions in Owner's Manual.

Click the CONTENTS link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com

Headlight Aim Adjustment

The headlamp adjustment screws are located inside the headlamp housing.
Image
  1. Remove the two headlight bezel screws (fairing models only) and remove the bezel from the fairing. Reinstall the bezel after adjusting the headlamp.

    Tool: M4 hex wrench or universal tool

  2. To adjust the headlamp vertically, tighten both top adjustment screws equally to adjust the beam downward. Loosen both screws equally to adjust the beam upward.

    Tool: M4 hex wrench or universal tool

  3. To adjust the headlamp horizontally, loosen the left side screw to adjust the beam to the left. Loosen the right side screw to adjust the beam to the right.

© Copyright Polaris Industries Inc. All rights reserved.