Content Source: 2020 RZR 570 Owner’s Manual (9929974 R03) > Operation Chapter

IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle.Always follow the warnings and instructions in Owner's Manual.

Click the CONTENTS link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com

Starting the Engine

NOTICE
Operating the vehicle immediately after starting could cause engine damage. Allow the engine to warm up for several minutes before operating the vehicle.
  1. Position the vehicle on a level surface outdoors or in a well- ventilated area.
  2. Sit in the driver's seat and fasten the seat belt. Secure the cab nets.
  3. Place the transmission in PARK. Engage the park brake (if equipped).
  4. Apply the brakes. Do not press the throttle pedal while starting the engine.
  5. Turn the ignition key to the START position. Engage the starter for a maximum of five seconds. Release the key when the engine starts.
  6. If the engine does not start within five seconds, return the ignition switch to the OFF position and wait five seconds. Repeat steps 5 and 6 until the engine starts.
  7. Vary the engine RPM slightly with the throttle to aid in warm up until the engine idles smoothly.
  8. Release the park brake before driving (if equipped).

© Copyright Polaris Industries Inc. All rights reserved.