Content Source: 2020 RANGER XP 1000 / CREW / NorthStar / CREW / Back Country / CREW Owner’s Manual (9929930 R02) > Maintenance Chapter

IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle.Always follow the warnings and instructions in Owner's Manual.

Click the CONTENTS link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com

Suspension Adjustment

The front and rear suspensions can be adjusted to provide a stiffer suspension, if necessary.

  1. Remove the top shock mounting bolts from the inside mounting positions .
  2. Reposition the shocks to the outside mounting holes .
  3. Reinstall the shock mounting bolts. Torque to 40 ft-lbs (54.2 Nm).

Image

Cam Adjustment

NOTE
Texas Edition models are equipped with Nivomat shocks, which cannot be manually adjusted. Nivomat shocks automatically adjust internal pressure during use
Adjust the front and rear shock absorber springs by rotating the adjustment cam either clockwise or counter-clockwise to increase or decrease spring tension.

Image

Image

Always heed the following rules if you make adjustments to this suspension.
  • Always return the suspension to the lowest (softest) setting after the load is removed from the vehicle. The increased suspension height will negatively impact vehicle stability when operating without a load.
  • Always apply the same adjustment setting to both rear wheels.

© Copyright Polaris Industries Inc. All rights reserved.