Standard Instrument Cluster

Content Source: 2020 550 Indy 144 Owner’s Manual (9929781 R01) > Gauge Chapter

IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle.Always follow the warnings and instructions in Owner's Manual.

Click the CONTENTS link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com

Standard Instrument Cluster

Low Oil	High Beam
Low Battery Voltage	Parking Brake
	Reverse

NOTICE

Certain products will damage the lens and other plastic surfaces. Do not use alcohol to clean the instrument cluster. Immediately clean off any gasoline that splashes on the instrument cluster.

Indicator Lamps

Indicator	Condition
	The low oil indicator light may flicker at times due to oil movement in the bottle, but when the light comes on and remains on, add the recommended oil before further operation.
	The low battery voltage indicator illuminates when the battery voltage is low.
	The high beam indicator illuminates when the lights are set to high beam.
	The parking brake Indicator illuminates when the parking brake is engaged. It will also illuminate when the service brake is in use.
	The reverse indicator flashes when the vehicle is in reverse. Slow flash for low elevation. Fast flash for high elevation (above 6000 ft.). To change from low to high speed. hold the reverse button for 5 seconds.

Rider Information Center

The rider information center is located in the instrument cluster. The center displays vehicle speed, engine speed, odometer, resettable trip meters (2), total engine hours of operation, fuel level, engine temperature and diagnostic display mode.

Setting changes must be made with the engine running or with the vehicle powered by an external DC power supply connector. The information center is set to display standard units of measurement for distance and temperature.

Information Display Area - This area displays either engine speed or vehicle speed (whichever is not displayed in the speed display), and maximum vehicle speed.

Speed Display - The speed display area displays either vehicle speed or engine speed.

Odometer/Engine Hour Display - This area displays the odometer, Trip A, Trip B and engine hours.

Speed Display Area

The speed display area displays either vehicle speed or engine speed. Vehicle speed is displayed in either miles per hour (MPH) or kilometers per hour (km/h). Engine speed is displayed in revolutions per minute (RPM).

To change which item displays, first make sure the information display area is set to display either engine speed or vehicle speed.
Press and release the center button.

Information Display Area

This area displays either engine speed or vehicle speed (whichever is not displayed in the speed display), maximum vehicle speed, and speed or RPM. To change the display, press and release the MODE button or the MODE switch until the desired item is displayed.

Odometer/Engine Hour Display Area

This area displays the odometer, Trip 1 meter, Trip 2 meter, CLOCK, and Engine Hours meter.

The odometer displays the total distance traveled by the vehicle since manufacture. Each trip meter records the distance traveled by the vehicle on a trip if the meter is reset before each trip. The CLOCK displays the time, and the engine hour meter displays the total hours the engine has been in operation since manufacture.

To change the display, press and release the SET button or SET switch until the desired item is displayed.

To reset a trip meter, press and hold the SET button or SET switch until the meter resets to zero.