Content Source: 2020 RUSH / SWITCHBACK / Pro-S / XCR Owner’s Manual (9929780 R02) > Maintenance Chapter

IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle.Always follow the warnings and instructions in Owner's Manual.

Click the CONTENTS link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com

Drive Chain Tension

Check drive chain tension at the intervals outlined in the Periodic Maintenance Table beginning on Periodic Maintenance Interval Table. Check again before each long trip.

Image
caution
Hot exhaust system parts can cause burns. Allow adequate time for the exhaust system to cool. Never perform this procedure with the engine running.
  1. Remove the side panels.
  2. Rotate the driven clutch counter-clockwise to move all chain slack to the tensioner side.
  3. Lock the parking brake.
  4. Loosen the adjuster bolt jam nut .
  5. Finger tighten the adjuster bolt until it can no longer be adjusted by hand, then back off 1/4 turn.
  6. Tighten the jam nut while holding the adjuster bolt.
    TORQUE

    21 ft. lbs. (28 Nm)

  7. Reinstall the side panels.


© Copyright Polaris Industries Inc. All rights reserved.