Digital Instrument Cluster

Content Source: 2020 600R Owner’s Manual (9929778 R01) > Features Chapter

IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle.Always follow the warnings and instructions in Owner's Manual.

Click the CONTENTS link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com

Digital Instrument Cluster

The rider information center is located in the instrument cluster. The center displays engine speed, total engine hours of operation, and clock.

Setting changes must be made with the engine running or with the vehicle powered by an external DC power supply connector.

Information Display Area - This area displays engine speed.
Engine Hour Display Area - This area displays the clock or engine hours. To change the display, see Engine Hour Display Area.

Engine Hour Display Area

This area displays the CLOCK and Engine Hours meter.

The CLOCK displays the time, and the engine hour meter displays the total hours the engine has been in operation since manufacture.

To change the display, press and release the SET button or SET switch until the desired item is displayed.

To reset a trip meter, press and hold the SET button or SET switch until the meter resets to zero.

Indicator Lamps

No indicator lamps will illuminate on this gauge. If a indicator lamp does illuminate you may have a short or bad gauge that will need to be replaced.

NOTICE

Certain products will damage the lens and other plastic surfaces. Do not use alcohol to clean the instrument cluster. Immediately clean off any gasoline that splashes on the instrument cluster.