Content Source: 2020 600 Indy Owner's Manual (9929776 R02) > The Perfect Fit Chapter
| IMPORTANT |
|
The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle.Always follow the warnings and instructions in Owner's Manual. Click the CONTENTS link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com |
| Component | Torque Do not over-tighten |
|---|---|
| IMPORTANT: Moving a handlebar
component without first loosening its screws/set screws may cut grooves
into the handlebar,
making it difficult to secure the
component. Do not move a handlebar component without first loosening
its mounting screws/set
screws. Take care to avoid damaging hand warmer/brake switch wires when moving components. |
|
| Left Hand Control/Brake Master Cylinder | 24 in-lbs (2.7 Nm) |
| Upper / Lower Handlebar/Riser Clamps | 16 ft-lbs (21.6 Nm) |
| Throttle Lever Block Set Screw | 27 in-lbs (3 Nm) |
| Throttle Lever Block Cover Screws | 6 in-lbs (0.7 Nm) |
| Auxiliary Engine Stop Switch Set Screw | 12 in-lbs (1.4 Nm) |
| Riser | Install with the “FWD” stamp facing forward, toward the hood. |
| Hand Guard Mounts (if applicable) | Hand-Tight |
© Copyright Polaris Industries Inc. All rights reserved.