Content Source: 2020 600/800 HO/850 AXYS Conventional Tunnel Owner’s Manual (9929775 R02) > Maintenance Chapter

IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle.Always follow the warnings and instructions in Owner's Manual.

Click the CONTENTS link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com

Drive Chain Tension

Check drive chain tension weekly and before each long trip.
  1. Remove the side panels.
  2. Rotate the driven clutch counter-clockwise to move all chain slack to the tensioner side. Lock the brake lever lock, or have an assistant hold the brake lever firmly.
  3. Loosen the adjuster bolt jam nut .Image
  4. Finger tighten the adjuster bolt until it can no longer be adjusted by hand, then back off 1/4 turn.
  5. Tighten the jam nut while holding the adjuster bolt.
    TORQUE

    21 ft. lbs. (28 Nm)
  6. Reinstall the side panels.
  7. Release the brake lever lock.

© Copyright Polaris Industries Inc. All rights reserved.