Content Source: 2020 600/800 HO/850 AXYS Conventional Tunnel Owner’s Manual (9929775 R02) > Troubleshooting Chapter
| IMPORTANT |
|
The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle.Always follow the warnings and instructions in Owner's Manual. Click the CONTENTS link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com |
| Belt Wear/Burn Diagnosis | |
|---|---|
| Causes | Solutions |
| Driving at low RPM | Drive at higher RPMs. Gear the machine down. Check belt deflection. |
| Insufficient warm-up | Warm the engine at least five minutes. Put the transmission in neutral to warm belt. In extreme cold weather, take the drive belt off the snowmobile and warm it up. Break snowmobile loose from the snow. |
| Towing at low RPM | Do not tow in deep snow. Use fast, aggressive throttle to engage clutch. |
| Riding with high RPM and slow speed (8000 RPM/10 MPH/16 km/h) | Lower the gear ratio. Reduce RPM. Avoid riding in high ambient temperatures. Check for snow ingestion. |
| Ice and snow build-up between track and tunnel | Warm the engine at least five minutes. Take the drive belt off the snowmobile in extremely cold weather and warm it up. Break snowmobile loose from the snow. |
| Poor engine performance | Check for fouled plugs and water, ice or dirt in the fuel tank or fuel line. |
| Loading snowmobiles onto trailers | Skis may gouge into trailers and prevent the drivetrain from spinning properly. Use enough speed to drive the snowmobile completely onto the trailer. Push and pull it to finish loading if necessary. |
| Clutch malfunction | Inspect clutch components. Your dealer can perform this service. |
| Slow, easy clutch engagement | Use fast, aggressive throttle to engage clutch. |
© Copyright Polaris Industries Inc. All rights reserved.