Content Source: 2019 Indian Scout Bobber Owner’s Manual (9929713 R04) > Maintenance Chapter

IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle.Always follow the warnings and instructions in Owner's Manual.

Click the CONTENTS link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com

Headlight Aim Inspection

On low beam, the horizontal cut-off of the light beam should be 6.9 in. (17.5 cm) lower than the center of the headlamp bulb and centered straight ahead at 33 feet (10 m).
  1. Verify that tire pressure is at specification. See Tire Pressure.
  2. Verify that rear suspension ride height (preload) is at specification. See Rear Shock Preload (Ride Height) Inspection.
  3. Position the motorcycle on a level surface with the headlight 33 feet (10 m) from a wall.
  4. With the operator and passenger (if applicable) on board, bring the motorcycle to the fully upright position.
  5. Start the engine and switch the headlamp to low beam. Observe the headlight aim on the wall.
  6. Make any necessary adjustments to headlight aim.
Image

© Copyright Polaris Inc. All rights reserved.