Content Source: 2019 Indian Scout Bobber Owner’s Manual (9929713 R04) > Pre-Ride Inspections Chapter

IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle.Always follow the warnings and instructions in Owner's Manual.

Click the CONTENTS link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com

Front Brake Fluid Level

  1. Straddle the motorcycle and bring it to the fully upright position. Position the handlebars so that the fluid reservoir is level.
  2. View the fluid level through the sight glass . The fluid should be clear. Replace cloudy or contaminated fluid.
  3. The fluid level should be above the minimum indicator mark in the sight glass.
  4. If the fluid level is low, inspect brake pads as outlined in the Brake Inspection / Cleaning section. If pads are not worn beyond the service limit, inspect the brake system for leaks. Check for signs of brake fluid leaks around hoses, fittings, reservoir, and brake calipers.
  5. Add brake fluid if necessary. See Front Brake Fluid.
Image

© Copyright Polaris Inc. All rights reserved.