Content Source: 2019 Indian Scout/Scout Sixty Owner’s Manual (9929711 R03) > Maintenance Chapter

IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle.Always follow the warnings and instructions in Owner's Manual.

Click the CONTENTS link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com

Removing the Seats

Driver’s Seat Removal

TIP
Use caution to avoid contact with the fuel tank when removing the seat.
  1. Grasp the front edge of the seat and pull upward abruptly to disengage the seat base grommet from the seat mount stud.Image
  2. Lift the seat and pull it slightly rearward to disengage the seat base from the rear retainer.

    Image

  3. To reinstall the seat, make sure the seat base engages the rear retainer, then press downward firmly at the front edge of the seat to engage the stud to the seat base grommet.
WARNING
If the seat is not aligned in a straight-ahead position, the grommet is not engaged to the stud. Make sure the grommet is fully engaged to the stud before operating.

Passenger’s Seat Removal

  1. Pull on front of seat to disengage mounting peg from grommet in seat base, just rear of the fuel tank.
  2. Pull upward and rearward to disengage the rear of the seat from the mounting post on the rear fender.

© Copyright Polaris Industries Inc. All rights reserved.